Technical Informations
Hannl"limited" Record Cleaning Machine with Rotating Brush
Music Hall MMF 9.1 Turntable
Tonearm Pro-Ject 9cc Evo with Pure Silver Wires
Nagaoka MP-500
Brocksieper Phonomax (Tube Phono-PreAmp)
E-MU 0404 external USB 2.0 Audiointerface
Silent Wire NF 5
Wavelab 6.1 recording software
iZotope RX Advanced 2.0 (Spectral repair)
Vacuum Cleaning > TT > Brocksieper Phonomax > Laptop > Wavelab 6.1 (24/192) > manual click removal
analyze (no clipping, no DC Bias offset) > resample to 24/96 > split into individual Tracks
> FLAC encoded (Vers. 1.21)
No silence been removed, please burn gapless to match original tracklayout.
Check-out our (Dr. Robert & aksman) new blog:
http://hiresmusic.wordpress.comYou can contact me via facebook under "aksman.vinyl"
Supprt us by purchasing a premium acccount (
http://www.filesonic.com/premium-ref/1773283)!!!
Metallica - Master of Puppets
Warner 180g 2x LP-Set @ 45 rpm / Cat.#: 470908-1
Half-speed mastered by Rob LoVerde @ MFSL, Sebastopol, CA.
Vinyl rip in 24-bit192kHz (presented in 24/96) | FLAC | m3u, cue &
Tech Log | Artwork | DR Analysis | 1.2 gb incl. recovery | Metal | 1986
Some critics have called Master of Puppets the best heavy metal album ever recorded; if it isn't, it certainly comes close.
- Steve Huey/AMG (5/5 Stars)
Tracklist
A1 Battery 5:10
A2 Master Of Puppets 8:38
B1 The Thing That Should Not Be 6:32
B2 Welcome Home (Sanitarium) 6:28
C1 Disposable Heroes 8:14
C2 Leper Messiah 5:38
D1 Orion (Instrumental) 8:12
D2 Damage, Inc. 5:08
Credits
Bass – Cliff Burton
Drums – Lars Ulrich
Engineer – Flemming Rasmussen
Engineer [Assistant Mixing Engineer] – Mark Wilzcak*
Lead Guitar – Kirk Hammett
Lyrics By – Hetfield*
Mastered By – George Marino
Mixed By – Michael Wagener
Producer – Flemming Rasmussen, Metallica
Rhythm Guitar, Vocals – James Hetfield
Written-By – Burton* (tracks: A2, D1, D2), Hetfield*, Hammett* (tracks: A2 to C1, D2), Ulrich*
Notes
180 gram vinyl with gatefold sleeve.
Remastered at half-speed.
Lyrics are printed on the inner gatefold.
Part of Metallica "45 RPM Series".
Technical Log
RCM Hannl 'limited' with "Rotating Brush"
Music Hall MMF 9.1 Turntable
Tonearm: Pro-Ject 9cc evo with Pure Silver Wires
Cartridge: Nagaoka MP-500
Brocksieper Phonomax (Tube Phono PreAmp)
E-MU 0404 external USB 2.0 Audiointerface
Interconnections : Silent Wire NF5
WaveLab 6 recording software
iZotope RX Advanced 2.00 for resampling and dithering
Vacuum cleaning > TT > Brocksieper Phonomax > E-MU 0404 > WaveLab 6 (24/192) > manual click removal >
analyze (no clipping, no DC Bias offset) > resampling and dithering with iZotope RX Advanced 2.00
> split into individual Tracks > FLAC encoded (Vers. 1.21)
No silence been removed, please burn gapless to match original tracklayout.
Personal Note
With my vinyl transfers, I try to catch the whole beauty of vinyl records; therefore I don't use any post-processing or any sound improvement. What you get is a clear and flat transfer. For getting a clear sound, I'll do an extended washing of each record with my RCM, which can take up to 30 minutes brushing on each side. Resistant ticks and clicks I try to remove as good as possible, but the priority is not to lose any musical information in the process. Surface noises, as long they are not too high, are left in place. Only on bad pressings or on records recorded at extremely low levels do I use a fade in-/-out. As John Peel said, "Life is full of surface noises." In some cases this means that I have to make a compromise.... The result has to pass my personal quality criteria, which is IMO quite high.
